Paint Touch Up

This took about 5 minutes. I touched this up myself.

Running Again- Large Update

Intake Hoses  have been replaced. The old ones were swelled up, causing air leaks.
Timing Belt needed to be reset, and a broken wire was traced down.
The Distributor was extremely loose and had to be tightened.

The oil also needed changed, as it was full of gas.

Thankfully she is now back up and running

Spark Plugs, Ignition Wires, Tuning

New Spark Plugs have been installed, new Ignition Wires, and next up, is some fine-tuning to the engine.

I have some re-mapping to do to the vacuum hoses. The EGR is not correct.
I am still recieving no fire-up, so I am looking past the plugs and wires for now and searching on some other related things. Hopefuly I will run accross the problem soon.

Spark Plugs, Tuning Engine

Two of the Spark Plugs have snapped, and the others just aren't doing too well. I ordered a whole new set of Ignition Wires and Bosch Spark Plugs. Apart from this, the engine needs some fine tuning. The 924 is not starting up at the moment, but obviously because of the Plug problem. Once I get them in the mail, I will set them in, and the car should hopefully fire up good. Afterwards I can mess with the Distributor and get a well sounding tune- which should in turn, help the slugging the 924 was suffering from earlier on.

The New Engine bay

New Handbrake

I recently installed a new handbrake. The last one was corroding, and I couldn't even park on the littlest of hills without rolling. I have yet to test the new handbrake out, but it should certainly be installed correctly.

Used Cylinder= Bad New Cylinder Ordered

Today I got the horrible Brake Master Cylinder replaced with the used one I collected from eBay. Appearantly it is in worse condition than the one that was in there before. With the brand new Brake Master Cylinder I ordered, having not been correctly described, I therefore recieved the wrong one. I ordered a brand new cylinder online- the CORRECT one this time. I made complete sure with the seller first. I will need to re-sell the unusable new cylinder on eBay or the 924board. More updates soon!